Network Working Group                                        S. Bellovin
Request for Comments: 1948                                 AT&T Research
Category: Informational                                         May 1996


               Defending Against Sequence Number Attacks

Status of This Memo

   This memo provides information for the Internet community.  This memo
   does not specify an Internet standard of any kind.  Distribution of
   this memo is unlimited.

Abstract

   IP spoofing attacks based on sequence number spoofing have become a
   serious threat on the Internet (CERT Advisory CA-95:01).  While
   ubiquitous crypgraphic authentication is the right answer, we propose
   a simple modification to TCP implementations that should be a very
   substantial block to the current wave of attacks.

Overview and Rational

   In 1985, Morris [1] described a form of attack based on guessing what
   sequence numbers TCP [2] will use for new connections.  Briefly, the
   attacker gags a host trusted by the target, impersonates the IP
   address of the trusted host when talking to the target, and completes
   the 3-way handshake based on its guess at the next initial sequence
   number to be used.  An ordinary connection to the target is used to
   gather sequence number state information.  This entire sequence,
   coupled with address-based authentication, allows the attacker to
   execute commands on the target host.

   Clearly, the proper solution is cryptographic authentication [3,4].
   But it will quite a long time before that is deployed.  It has
   therefore been necessary for many sites to restrict use of protocols
   that rely on address-based authentication, such as rlogin and rsh.
   Unfortunately, the prevalence of "sniffer attacks" -- network
   eavesdropping (CERT Advisory CA-94:01) -- has rendered ordinary
   TELNET [5] very dangerous as well.  The Internet is thus left without
   a safe, secure mechanism for remote login.

   We propose a simple change to TCP implementations that will block
   most sequence number guessing attacks.  More precisely, such attacks
   will remain possible if and only if the Bad Guy already has the
   ability to launch even more devastating attacks.





Bellovin                     Informational                      [Page 1]


RFC 1948                Sequence Number Attacks                 May 1996


Details of the Attack

   In order to understand the particular case of sequence number
   guessing, one must look at the 3-way handshake used in the TCP open
   sequence [2].  Suppose client machine A wants to talk to rsh server
   B.  It sends the following message:

           A->B: SYN, ISNa

   That is, it sends a packet with the SYN ("synchronize sequence
   number") bit set and an initial sequence number ISNa.

   B replies with

           B->A: SYN, ISNb, ACK(ISNa)

   In addition to sending its own initial sequence number, it
   acknowledges A's.  Note that the actual numeric value ISNa must
   appear in the message.

   A concludes the handshake by sending

           A->B: ACK(ISNb)

   The initial sequence numbers are intended to be more or less random.
   More precisely, RFC 793 specifies that the 32-bit counter be
   incremented by 1 in the low-order position about every 4
   microseconds.  Instead, Berkeley-derived kernels increment it by a
   constant every second, and by another constant for each new
   connection.  Thus, if you open a connection to a machine, you know to
   a very high degree of confidence what sequence number it will use for
   its next connection.  And therein lies the attack.

   The attacker X first opens a real connection to its target B -- say,
   to the mail port or the TCP echo port.  This gives ISNb.  It then
   impersonates A and sends

        Ax->B: SYN, ISNx

   where "Ax" denotes a packet sent by X pretending to be A.

   B's response to X's original SYN (so to speak)

        B->A: SYN, ISNb', ACK(ISNx)







Bellovin                     Informational                      [Page 2]


RFC 1948                Sequence Number Attacks                 May 1996


   goes to the legitimate A, about which more anon.  X never sees that
   message but can still send

        Ax->B: ACK(ISNb')

   using the predicted value for ISNb'.  If the guess is right -- and
   usually it will be -- B's rsh server thinks it has a legitimate
   connection with A, when in fact X is sending the packets.  X can't
   see the output from this session, but it can execute commands as more
   or less any user -- and in that case, the game is over and X has won.

   There is a minor difficulty here.  If A sees B's message, it will
   realize that B is acknowledging something it never sent, and will
   send a RST packet in response to tear down the connection.  There are
   a variety of ways to prevent this; the easiest is to wait until the
   real A is down (possibly as a result of enemy action, of course).  In
   actual practice, X can gag A by exploiting a very common
   implementation bug; this is described below.

The Fix

   The choice of initial sequence numbers for a connection is not
   random.  Rather, it must be chosen so as to minimize the probability
   of old stale packets being accepted by new incarnations of the same
   connection [6, Appendix A].  Furthermore, implementations of TCP
   derived from 4.2BSD contain special code to deal with such
   reincarnations when the server end of the original connection is
   still in TIMEWAIT state [7, pp. 945].  Accordingly, simple
   randomization, as suggested in [8], will not work well.

   But duplicate packets, and hence the restrictions on the initial
   sequence number for reincarnations, are peculiar to individual
   connections.  That is, there is no connection, syntactic or semantic,
   between the sequence numbers used for two different connections.  We
   can prevent sequence number guessing attacks by giving each
   connection -- that is, each 4-tuple of <localhost, localport,
   remotehost, remoteport> -- a separate sequence number space.  Within
   each space, the initial sequence number is incremented according to
   [2]; however, there is no obvious relationship between the numbering
   in different spaces.

   The obvious way to do this is to maintain state for dead connections,
   and the easiest way to do that is to change the TCP state transition
   diagram so that both ends of all connections go to TIMEWAIT state.
   That would work, but it's inelegant and consumes storage space.
   Instead, we use the current 4 microsecond timer M and set

           ISN = M + F(localhost, localport, remotehost, remoteport).



Bellovin                     Informational                      [Page 3]


RFC 1948                Sequence Number Attacks                 May 1996


   It is vital that F not be computable from the outside, or an attacker
   could still guess at sequence numbers from the initial sequence
   number used for some other connection.  We therefore suggest that F
   be a cryptographic hash function of the connection-id and some secret
   data.  MD5 [9] is a good choice, since the code is widely available.
   The secret data can either be a true random number [10], or it can be
   the combination of some per-host secret and the boot time of the
   machine.  The boot time is included to ensure that the secret is
   changed on occasion.  Other data, such as the host's IP address and
   name, may be included in the hash as well; this eases administration
   by permitting a network of workstations to share the same secret data
   while still giving them separate sequence number spaces.  Our
   recommendation, in fact, is to use all three of these items: as
   random a number as the hardware can generate, an administratively-
   installed pass phrase, and the machine's IP address.  This allows for
   local choice on how secure the secret is.

   Note that the secret cannot easily be changed on a live machine.
   Doing so would change the initial sequence numbers used for
   reincarnated connections; to maintain safety, either dead connection
   state must be kept or a quiet time observed for two maximum segment
   lifetimes after such a change.

A Common TCP Bug

   As mentioned earlier, attackers using sequence number guessing have
   to "gag" the trusted machine first.  While a number of strategies are
   possible, most of the attacks detected thus far rely on an
   implementation bug.

   When SYN packets are received for a connection, the receiving system
   creates a new TCB in SYN-RCVD state.  To avoid overconsumption of
   resources, 4.2BSD-derived systems permit only a limited number of
   TCBs in this state per connection.  Once this limit is reached,
   future SYN packets for new connections are discarded; it is assumed
   that the client will retransmit them as needed.

   When a packet is received, the first thing that must be done is a
   search for the TCB for that connection.  If no TCB is found, the
   kernel searches for a "wild card" TCB used by servers to accept
   connections from all clients.  Unfortunately, in many kernels this
   code is invoked for any incoming packets, not just for initial SYN
   packets.  If the SYN-RCVD queue is full for the wildcard TCB, any new
   packets specifying just that host and port number will be discarded,
   even if they aren't SYN packets.






Bellovin                     Informational                      [Page 4]


RFC 1948                Sequence Number Attacks                 May 1996


   To gag a host, then, the attacker sends a few dozen SYN packets to
   the rlogin port from different port numbers on some non-existent
   machine.  This fills up the SYN-RCVD queue, while the SYN+ACK packets
   go off to the bit bucket.  The attack on the target machine then
   appears to come from the rlogin port on the trusted machine.  The
   replies -- the SYN+ACKs from the target -- will be perceived as
   packets belonging to a full queue, and will be dropped silently.
   This could be avoided if the full queue code checked for the ACK bit,
   which cannot legally be on for legitimate open requests.  If it is
   on, RST should be sent in reply.

Security Considerations

   Good sequence numbers are not a replacement for cryptographic
   authentication.  At best, they're a palliative measure.

   An eavesdropper who can observe the initial messages for a connection
   can determine its sequence number state, and may still be able to
   launch sequence number guessing attacks by impersonating that
   connection.  However, such an eavesdropper can also hijack existing
   connections [11], so the incremental threat isn't that high.  Still,
   since the offset between a fake connection and a given real
   connection will be more or less constant for the lifetime of the
   secret, it is important to ensure that attackers can never capture
   such packets.  Typical attacks that could disclose them include both
   eavesdropping and the variety of routing attacks discussed in [8].

   If random numbers are used as the sole source of the secret, they
   MUST be chosen in accordance with the recommendations given in [10].

Acknowledgments

   Matt Blaze and Jim Ellis contributed some crucial ideas to this RFC.
   Frank Kastenholz contributed constructive comments to this memo.

References

   [1]  R.T. Morris, "A Weakness in the 4.2BSD UNIX TCP/IP Software",
        CSTR 117, 1985, AT&T Bell Laboratories, Murray Hill, NJ.

   [2]  Postel, J., "Transmission Control Protocol", STD 7, RFC 793,
        September 1981.

   [3]  Kohl, J., and C. Neuman, "The Kerberos Network Authentication
        Service (V5)", RFC 1510, September 1993.

   [4]  Atkinson, R., "Security Architecture for the Internet
        Protocol", RFC 1825, August 1995.



Bellovin                     Informational                      [Page 5]


RFC 1948                Sequence Number Attacks                 May 1996


   [5]  Postel, J., and J. Reynolds, "Telnet Protocol Specification",
        STD 8, RFC 854, May 1983.

   [6]  Jacobson, V., Braden, R., and L. Zhang, "TCP Extension for
        High-Speed Paths", RFC 1885, October 1990.

   [7]  G.R. Wright, W. R. Stevens, "TCP/IP Illustrated, Volume 2",
        1995.  Addison-Wesley.

   [8]  S. Bellovin, "Security Problems in the TCP/IP Protocol Suite",
        April 1989, Computer Communications Review, vol. 19, no. 2, pp.
        32-48.

   [9]  Rivest, R., "The MD5 Message-Digest Algorithm", RFC 1321,
        April 1992.

   [10] Eastlake, D., Crocker, S., and J. Schiller, "Randomness
        Recommendations for Security", RFC 1750, December 1994.

   [11] L. Joncheray, "A Simple Active Attack Against TCP, 1995, Proc.
        Fifth Usenix UNIX Security Symposium.

Author's Address

   Steven M. Bellovin
   AT&T Research
   600 Mountain Avenue
   Murray Hill, NJ  07974

   Phone: (908) 582-5886
   EMail: smb@research.att.com




















Bellovin                     Informational                      [Page 6]